NEWS

The 00-Series pump is ideally suited for low volume applications such as pressure lubrication, hydraulic service, fuel supply, and general liquid transfer.

Description

Design: Drive speeds to 1800 rpm; discharge
pressures to 300 psi; flow rate to .5 gpm; foot or
flange mounted.

Material: Cast Iron casings with precision
machined, heat treated gears and case hardened
shafts. Pumps are also available in Ductile Iron.

Bearings: Plain.

Seal: Lip Seal.

Lubrication: Self lubricating using the pumped
liquid. Also available for handling non-lubricating
liquids.

Rotation: Clockwise or counter-clockwise. Discharge is
on the side of the pump opposite that toward which the
shaft rotates.

Liquid Viscosities: 32 ssu to 1750 ssu. Clean liquids
having good lubricating qualities. Adaptable for handling
liquids of higher or lower viscosities.

Suction Lift: Up to 28″ Hg / 31 feet depending on the
type of liquid being pumped.

Drive Options: A-Drive (pump connected to c-face
motor with adapter bracket and coupling); D-Drive (pump
coupled to motor mounted on baseplate).

Accessories: Repair Kits; Gear Sets; and Seal Kits.
Refer to Section 13.