NEWS

These pumps operate quietly at nominal motor speeds and discharge large volumes of liquid at medium pressures. Typical applications for these pumps are hydraulic power for positioning devices, lifts, machine actuation, liquid pressurization for fuel burners and blenders as well as general transfer in all industries.

Description

Design: Drive speeds to 1725 rpm; discharge
pressures to 200 psi; flow rate to 51.4 gpm; foot or
flange mounted.

Material: Cast Iron casings with precision
machined, heat treated gears and case hardened
shafts. Pumps are also available in Ductile Iron.

Bearings: Anti-friction.

Seal: Mechanical seal. Also available with packed
seal.

Lubrication: Self lubricating using the pumped
liquid.

Rotation: Clockwise or counter-clockwise. Specify
at time of order.

Liquid Viscosities: 100 ssu to 3,000 ssu. Clean
liquids having good lubricating qualities. Adaptable for
handling liquids of higher or lower viscosities.

Suction Lift: 28″ Hg / 31 feet depending on the type of
liquid being pumped.

Drive Options: A-Drive (pump connected to C-Face
motor with adapter bracket and coupling); D-Drive (pump
coupled to motor mounted on baseplate); GR-Drive (pump
coupled to gear reducer coupled to motor mounted on
baseplate); B-Drive (pump and motor connected by
V-belt and pulleys mounted on baseplate).

Accessories: Repair Kits; Gear Sets; Bearing Kits; and

Seal Kits. Refer to Section 13.