NEWS

B-Series pumps are a good choice for a variety of recirculating, mixing, and transfer applications. Typical pumped liquids
include solvents, resins, and petroleum products. These pumps are well suited for light, medium, and intermittent service.

Description

Design: Drive speeds to 900 rpm; discharge pressures to
to 200 psi; flow rate to 32.0 gpm; foot or flange mounted;
with or without integral relief valve.

Material: Cast Iron casings with precision machined,
heat treated gears and case hardened shafts. Pumps are
also available in Ductile Iron and Steel.

Bearings: Replaceable iron sleeve bearings. Also
available with carbon graphite or bronze bearings.

Seal: Mechanical seal. Also available with compression
packing or lip seal. Mechanical seal and lip seals available
with different

Lubrication: Self lubricating using the pumped liquid. Also
available for handling non-lubricating liquids.

Rotation: Pumps are available for clockwise or counterclockwise
rotation. Discharge is always on the side of the
pump toward which the top of the shaft rotates. Specify at time
of order.

Liquid Viscosities: 32 ssu to 100,000 ssu. Adaptable for
handling liquids from water soluble to molten lead.
Suction Lift: 28″ Hg / 31 feet depending on the type of liquid
being pumped.

Drive Options: E-Drive (pump close coupled to motor); ADrive
(pump connected to c-face motor with adapter bracket
and coupling); D-Drive (pump coupled to motor mounted on
baseplate);GR-Drive (pump coupled to gear reducer coupled to
motor mounted on baseplate); B-Drive (pump and motor
connected by V-belt and pulleys mounted on baseplate).

Accessories: Repair Kits; Gear Sets; Bearing Kits; and Seal
Kits. Refer to Section 13.