Commercial Pumps | BSM Pumps | GLP


BSM Pump - S-Series

Monday, November 28, 2022
BSM Pump - S-Series image

S-Series pumps are designed to operate at standard motor speeds and are suitable for pumping oils, inert chemicals,
petroleum products and various other liquids in transfer, circulation, lubrication, and liquid pressurization applications.


Design: Drive speeds to 1800 rpm; discharge pressures
to 200 psi; flow rate to 32.0 gpm; foot or flange mounted;
with or without integral relief valve.

Material: Cast Iron casings with precision machined,
heat treated gears and case hardened shafts. Pumps are
also available in Ductile Iron and Steel.
Bearings: Replaceable iron sleeve bearings. Also
available with carbon graphite or bronze bearings.

Seal: Mechanical seal. Also available with compression
packing or lip seal. Mechanical seal and lip seals available
with different elastomers for pumping different types of

Lubrication: Self lubricating using the pumped liquid. Also
available for handling non-lubricating liquids.
Rotation: Pumps are available for clockwise or counter-
clockwise rotation. Discharge is always on the side of the
pump toward which the top of the shaft rotates. Specify at time
of order.

Liquid Viscosities: 32 ssu to 100,000 ssu. Adaptable for
handling liquids from water soluble to molten lead.
Suction Lift: 28″ Hg / 31 feet depending on the type of liquid
being pumped.

Drive Options: E-Drive (pump close coupled to motor); A-
Drive (pump connected to c-face motor with adapter bracket
and coupling); D-Drive (pump coupled to motor mounted on
baseplate);GR-Drive (pump coupled to gear reducer coupled to
motor mounted on baseplate); B-Drive (pump and motor
connected by V-belt and pulleys mounted on baseplate).
Accessories: Repair Kits; Gear Sets; Bearing Kits; and Seal
Kits. Refer to Section 13.



Great Lakes Pump and Supply
ruthman company logo
Great Lakes Pump & Supply Co.
1075 Naughton
Troy, MI 48083
Phone: 248-528-9100

© 2024 Great Lakes Pump