BSM Stainless Steel Pumps are designed to handle the toughest Chemical Processing Applications.
Design: Drive speeds to 1800 rpm; discharge
pressures to 200 psi; flow rate to 32.0 gpm; foot or
flange mounted; with or without integral relief valve.
Material: 316 stainless steel casings with precision
machined, 17-4 stainless steel gears and case
Bearings: Replaceable carbon graphite sleeve
bearings with carbon graphite thrust plates.
Seal: Mechanical seal. Also available with
compression packing or lip seal. Mechanical seal and
lip seals available with different elastomers for
pumping different types of liquids.
Lubrication: Self lubricating using the pumped
liquid. Also available for handling non-lubricating
Rotation: Pumps are available for clockwise or
counter-clockwise rotation. Discharge is always on the
side of the pump toward which the top of the shaft
Liquid Viscosities: 32 ssu to 100,000 ssu.
Suction Lift: Up to 28″ Hg / 31 feet depending on the
type of liquid being pumped.
Drive Options: E-Drive (pump close coupled to motor);
A-Drive (pump connected to C-Face motor with adapter
bracket and coupling), D-Drive (pump coupled to motor
mounted on baseplate); GR-Drive (pump coupled to gear
reducer coupled to motor mounted on baseplate); B-Drive
(pump and motor connected by V-belt and pulleys
mounted on baseplate).
Accessories: Repair Kits; Gear Sets; Bearing Kit, and
Seal Kits. Refer to Section 13.
© 2023 Great Lakes Pump