With .22 or .37 cubic inch displacement SAE port fitting gerotor type motors, this end suction centrifugal pump boasts hydraulic flows up to 10 GPM and a maximum pressure of 2500 PSI. This chemical pump is available with either a semi-open impeller or a fully enclosed impeller design to fit your application-specific needs.
The ChemFlo® 4 hydraulic pumps utilize a semi-open impeller design to allow for the passage of larger solid sizes than similar-sized enclosed impellers. Enclosed impeller options are available for higher efficiency performance. Several seal options are available in addition to the standard type 2100 carbon/ceramic / Viton mechanical seal.
ChemFlo®4 hydraulic pumps are offered with .22 or .37 cubic inch displacement SAE port fitting gerotor type motors for hydraulic flows up to 10 GPM and a maximum pressure of 2,500 PSI. An optional case drain allows the motor to be used in series with other hydraulic devices. Some hydraulic motors are bi-rotational.
Further expanding the versatility of the ChemFlo® series is the CFB 4 pump, a ChemFlo® 4 in NiBrAl material. All wetted parts are produced in CA 958 nickel aluminum bronze including the drive sleeve to maximize corrosion protection in seawater applications.
SUCTION AND DISCHARGE - 2" x 1-1/2" NPT
APPLICATION - Agricultural, Commercial, Industrial, Marine, OEM
MATERIALS OF CONSTRUCTION - 316 stainless steel, CFB (nickel aluminum bronze)
FLOW - Up to 220 GPM
HEAD FEET - Up to 205'
IMPELLER - 4.5" semi-open, cast 316 SS
DRIVE OPTIONS - Hydraulic motor .22 cu. in, Hydraulic motor .37 cu. in.
SEAL - Standard carbon / ceramic / Viton
OPTIONS - Hydraulic motors with flow control, case drain
HYDRAULIC SYSTEM PRESSURE - Up to 2500 PSI
HYDRAULIC MOTOR - Gerotor
HYDRAULIC FLUID FLOW - Up to 10 GPM
PSI - Up to 100