The CHEMFLO® 5 Hydraulic end suction centrifugal pump is made with high-quality investment cast 316 stainless steel parts to guarantee no corrosion runs its course on the pump. This model of chemical pump is offered with a 1.16 or 1.59 cubic inch displacement SAE port. This fits gerotor-type motors reaching hydraulic flows up to 28 GPM and a max pressure of 1500 PSI.
The ChemFlo® 5 hydraulic pumps utilize an enclosed impeller designed for achieving higher heads and efficiencies than a standard semi-open impeller. Multiple hydraulic flows allow the ChemFlo® 5 to meet most duty points up to 300 GPM and total head up to 200 feet. Several mechanical seal options are available in addition to the standard type 2100 carbon/ceramic / Viton mechanical seal.
ChemFlo® 5 hydraulic pumps are offered with 1.16 or 1.59 cubic inch displacement SAE port fitting gerotor type motors for hydraulic flows up to 28 GPM and a maximum pressure of 1500 PSI. Some hydraulic motors are bi-rotational.
SUCTION AND DISCHARGE - 2" x 1-1/2" ANSI 125# flange
APPLICATION - Agricultural, Commercial, Industrial, Marine, OEM
MATERIALS OF CONSTRUCTION - 316 stainless steel
FLOW - Up to 300 GPM
HEAD FEET - Up to 200'
IMPELLER - 6.18" enclosed, cast 316 SS
DRIVE OPTIONS - Hydraulic motor 1.16 cu. in., Hydraulic motor 1.59 cu. in.
SEAL - Special seal material combinations available (consult factory)
HYDRAULIC FLUID FLOW - Up to 28 GPM
HYDRAULIC SYSTEM PRESSURE - Up to 1500 PSI
HYDRAULIC MOTOR - Gerotor
PSI - Up to 85