Readily available with a .73 cubic inch displacement gear motor, this hydraulic self-priming centrifugal pump can lift liquids to 25 feet above the source. This product features options with double-greased seals and stainless steel impellers to ensure this pump runs efficiently when dealing with corrosive materials. A full column of liquid is always kept in the suction line by a well-engineered flapper valve.
A FLOMAX® 10 hydraulic pump is available with a .73 cubic inch displacement gear motor with hydraulic flows ranging from 8 GPM to 15 GPM and hydraulic pressures ranging from 500 PSI to 1700 PSI.
Standard features include a stainless steel drive sleeve, stainless steel fasteners, renewable wear plate, and a semi-open dynamically balanced impeller. Options include double grease lubricated seals, stainless steel impellers, and seals for all types of abrasive and/or corrosive services.
The FLOMAX® series of pumps are commonly used in Industrial, Agricultural, and Marine applications, such as Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators and sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.
SUCTION AND DISCHARGE
2" x 2" NPT ports
Agricultural, Industrial, Marine, OEM
MATERIALS OF CONSTRUCTION
Bronze, Cast iron
Up to 200 GPM
Up to 195'
Hydraulic motor .73 cu. in.
Special seal material combinations available (consult factory), Standard carbon / ceramic / Viton
HYDRAULIC SYSTEM PRESSURE
Up to 1700 psi
Hydraulic motors with flow control
Renewable wear plate, Stainless steel drive sleeve, Stainless steel fasteners, Up to a 25' suction lift
MAX SOLID SIZE
HYDRAULIC FLUID FLOW
Up to 15 GPM
Up to 85
Flomax® 8 Stainless Steel Double Steel Centrifugal Pump