Flomax® 15 316 SS

NEWS

Flomax® 15 316 SS

Tuesday, December 19, 2023
Flomax® 15 316 SS image

This self-priming pump contains a well-greased seal which allows the pump to operate in a dry run condition, increasing hours of running time while protecting the seal. Outfitted with 316 stainless steel, this pump can tolerate caustic liquids. With that being stated, the FLOMAX® 15 316 SS self-priming centrifugal pump is perfect for any application.

A FLOMAX® 15, 316 SS PumPAK® is a fully assembled and run-tested pump end that can be easily coupled to several drivers such as hydraulic motors, 184TC and 215C frame motors, and gas engines. A bearing pedestal is also available for a T-frame motor or belt drive.

Standard features include a 3″ NPT 150# class flat flange on the suction of the pump, a Viton flapper, a 3″ SAE 4-bolt flat face discharge connection, a stainless steel drive sleeve, stainless steel fasteners, a renewable wear plate, a semi-open dynamically balanced impeller. Options include a 5-blade stainless steel impeller and seals for all types of abrasive and/or corrosive services.

The FLOMAX® series of pumps are commonly used in Industrial, OEM, Agricultural, and Marine applications, such as Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators and sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.

Specifications

APPLICATION
Agricultural, Industrial, Marine, OEM

MATERIALS OF CONSTRUCTION
316 SS

FLOW
Up to 300 GPM

HEAD FEET
Up to 136'

IMPELLER
6.0" max. diameter, semi-open

MOTOR
Up to 7.5 HP

DRIVE OPTIONS
Close Coupled to 184TC, Close Coupled to 215C, Engine mount to 11HP, Engine mount to 13HP, Pedestal, PumPAK® (without motor)

SEAL
Carbon/Ceramic/Viton, Special seal material combinations available (consult factory)

FEATURES
Renewable wear plate, Up to 25' suction lift

OPTIONS
5-blade impeller for higher flows, Available 3" NPT ANSI 150# class discharge flange kit (p/n: 38647), Hydraulic motor .73 cu. in.

SUCTION
3" NPT ANSI 150# class flat flange with Viton flapper

DISCHARGE
3" ANSI 4-bolt flange connection, Optional 3" NPT ANSI 150# Flange Available.  The part number for the Optional Discharge Flange Kit is 38647.

Great Lakes Pump and Supply
ruthman company logo
Great Lakes Pump & Supply Co.
1075 Naughton
Troy, MI 48083
Phone: 248-528-9100

© 2024 Great Lakes Pump