NEWS

Created for agricultural, marine, and industrial applications, this self-priming pump comes in a variety of options that include a stainless steel impeller and double grease lubricated seals. Once this self-priming centrifugal pump is fired up, a built-in flapper valve maintains a full column of liquid throughout the suction line. The centrifugal system is capable of lifting liquids as high as 25 feet.

A FLOMAX® 15 hydraulic pump is available with a .73 cubic inch displacement gear motor with hydraulic flows ranging from 8 GPM to 15 GPM and hydraulic pressures ranging from 500 PSI to 1700 PSI.

Standard features include a stainless steel drive sleeve, stainless steel fasteners, renewable wear plate, and a semi-open dynamically balanced impeller. Options include double grease lubricated seals, stainless steel impellers, and seals for all types of abrasive and/or corrosive services.

The FLOMAX® series of pumps are commonly used in Industrial, Agricultural, and Marine applications, such as Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators and sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.

A FLOMAX® 15 hydraulic pump is available with a .73 cubic inch displacement gear motor with hydraulic flows ranging from 8 GPM to 15 GPM and hydraulic pressures ranging from 500 PSI to 1700 PSI.

Standard features include a stainless steel drive sleeve, stainless steel fasteners, renewable wear plate, and a semi-open dynamically balanced impeller. Options include double grease lubricated seals, stainless steel impellers, and seals for all types of abrasive and/or corrosive services.

The FLOMAX® series of pumps are commonly used in Industrial, Agricultural, and Marine applications, such as Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators and sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.

Specifications

SUCTION AND DISCHARGE
2" x 2" NPT ports

APPLICATION
Agricultural, Industrial, Marine, OEM

MATERIALS OF CONSTRUCTION
Bronze, Cast iron

FLOW
Up to 200 GPM

HEAD FEET
Up to 195'

IMPELLER
6.0" semi-open

DRIVE OPTIONS
Hydraulic motor .73 cu. in.

SEAL
Special seal material combinations available (consult factory), Standard carbon / ceramic / Viton

HYDRAULIC SYSTEM PRESSURE
Up to 1700 psi

HYDRAULIC MOTOR
Gear

OPTIONS
Hydraulic motors with flow control

FEATURES
Renewable wear plate, Stainless steel drive sleeve, Stainless steel fasteners, Up to a 25' suction lift

MAX SOLID SIZE

.625" diameter

HYDRAULIC FLUID FLOW
Up to 15 GPM

PSI
Up to 85