Yamada DP-10/DP-15/G15 Series

NEWS

Yamada DP-10/DP-15/G15 Series

Tuesday, March 12, 2024
Yamada DP-10/DP-15/G15 Series image

3/8" & 1/2" FLUID PORTS

DP-10 series 3/8" AODD pumps provide a maximum flow rate of 6 GPM and are available in Aluminum, Stainless Steel (316), and Polypropylene.

DP-15 series 1/2" AODD pumps provide a maximum flow rate of 7.4 GPM and are available in Polypropylene and Groundable Acetal.

G15 Global Series 1/2" AODD pumps provide a maximum flow rate of 16.6 GPM and are available in Aluminum, Stainless Steel (316), Pure Polypropylene, and Kymar.

We offer a wide selection of diaphragm materials that cover a variety of applications.

The NDP series pumps utilize a C-Spool.

Our air valve technology separates Yamada from the rest of the pack. Yamada NDP series pumps use a non-lubricated main air valve and independent pilot mechanisms to control the air logic.

As compressed air enters the pump, it is directed via the main air valve to one side or the other, depending upon the starting position of the c-spool.  As the air enters the chamber, it forces the diaphragm outward. This outward momentum forces liquid out of the discharge ball valve and loads the opposite inlet ball valve. As the diaphragm travels outward, the connected diaphragm on the opposite side pulls the diaphragm inward.

When it travels a full stroke, it will contact the pilot valve, depressing it and breaking the seal to open an exhaust port.

The open port allows the compressed air to the exhaust from the back side of the air valve. The pressure drop produces a shift of the main air valve. This motion simply repeats on the other side.

The Global Series pumps utilize a Step Spool (S-Spool).

Yamada Global Series pumps do not have an independent pilot valve system (fewer parts) and consume less air than the competition.  Available with multiport options, these AODD pumps perform extremely well in continuous stop/start operations and provide exceptional suction lift. 
 

DP-10 SPECIFICATIONS

Fluid Port 3/8" NPT
GPM 6
Discharge Volume Per Cycle 0.020 Gallons
Air Motor Aluminum
INTAKE & DISCHARGE CONNECTIONS
Polypropylene (PPG) 3/8" Female NPT
Aluminum (ADC-12) 3/8" Female NPT
Stainless Steel (316) 3/8" Female NPT
Air Inlet 1/4" Female NPT (includes ball valve)
Air Exhaust 3/8" Female NPT (includes silencer)


DP-15 SPECIFICATIONS

Fluid Port 1/2" NPT
GPM 7.4
Discharge Volume Per Cycle 0.027 Gallons
Air Motor Aluminum
INTAKE & DISCHARGE CONNECTIONS
Polypropylene (PPG) 1/2" Female NPT
Aluminum (ADC-12) 1/2" Female NPT
Groundable Acetal 1/2" Female NPT
Air Inlet 1/4" Female NPT (includes ball valve)
Air Exhaust 3/8” Female NPT (includes silencer)


G15 SPECIFICATIONS

Fluid Port 1/2" Female NPT
GPM 16.6
Discharge Volume Per Cycle 0.039-0.050 Gallons
Air Motor Polypropylene (G15 plastic), Aluminum (G15 metal)
INTAKE & DISCHARGE CONNECTIONS
Pure Polypropylene (PP) 1/2" Female NPT
Kynar® 1/2" Female NPT
Aluminum (ADC-12) 1/2" Female NPT
Stainless Steel (316) 1/2" Female NPT
Air Inlet 1/4" Female NPT
Air Exhaust 3/8” Female NPT
 
DIAPHRAGM MAXIMUM LIQUID TEMPERATURE*
Buna N 180°F (82°C)
Neoprene 180°F (82°C)
Santoprene® (TPO) 180°F (82°C)
EPDM 212°F (100°C)
PTFE 212°F (100°C)
Hytrel® (TPEE) 248°F (120°C)
Viton® fluoroelastomer 248°F (120°C)
Ultimate 212°F (100°C)
*The maximum liquid temperature for metal and Kynar® fitted pumps is determined by the elastomer (diaphragm material). Polypropylene pumps have a maximum liquid temperature of 180°F (82°C) regardless of diaphragm material. 
 
ADDITIONAL SPECIFICATIONS
Air Supply Pressure 20-100 PSI
Max. Cycles Per Minute 379 (pumps vary)
Max. Size Solid 1/32" (1mm)
Max. Dry Suction Lift 13.5' (pumps vary)

 

Great Lakes Pump and Supply
ruthman company logo
Great Lakes Pump & Supply Co.
1075 Naughton
Troy, MI 48083
Phone: 248-528-9100

© 2024 Great Lakes Pump