Yamada® NDP-40 Series
Tuesday, March 12, 20241-1/2" FLUID PORT
Yamada® NDP-40 series AODD pumps provide a maximum flow rate of 107 gallons per minute. Pumps are available in aluminum, stainless steel (316), Kynar® (PVDF), groundable acetal, and polypropylene construction.
Our air valve technology separates Yamada from the rest of the pack. Yamada uses a non-lubricated main air valve and independent pilot mechanisms to control the air logic.
As compressed air enters the pump, it is directed via the main air valve to one side or the other, depending upon the starting position of the c-spool. As the air enters the chamber, it forces the diaphragm outward. This outward momentum forces liquid out of the discharge ball valve and loads the opposite inlet ball valve. As the diaphragm travels outward, the connected diaphragm on the opposite side pulls the diaphragm inward.
When it travels a full stroke, it will contact the pilot valve, depressing it and breaking the seal to open an exhaust port.
The open port allows the compressed air to the exhaust from the back side of the air valve. The pressure drop produces a shift of the main air valve. This motion simply repeats on the other side.
| 107 Gallons/Minute | |
| 1-1/2" Fluid Port (NPT or ANSI Flange) |
INTAKE & DISCHARGE CONNECTIONS
| Polypropylene (PPG) | 1-1/2" ANSI Flange B16.5 #150 |
| Kynar® (PVDF) | 1-1/2" ANSI Flange B16.5 #150 |
| Aluminum (ADC-12) | 1-1/2" ANSI Flange B16.5 #150 (with tapped 1-1/2" Female NPT) |
| Stainless Steel (316) | 1-1/2" ANSI Flange B16.5 #150 or 1-1/2" Female NPT |
| Cast Iron | 1-1/2" Female NPT |
| Air Inlet | 1/2" Female NPT (includes ball valve) |
| Air Exhaust | 1" Female NPT (includes silencer) |
DIAPHRAGM MAXIMUM LIQUID TEMPERATURE1
| Buna N 180°F (82°C) |
| Neoprene 180°F (82°C) |
| Santoprene®(TPO) 180°F (82°C) |
| EPDM 212°F (100°C) |
| PTFE 212°F (100°C) |
| Hytrel® (TPE) 248°F (120°C) |
| Viton® fluoroelastomer 248°F (120°C) |
| Ultimate 212°F (100°C) |
| *The maximum liquid temperature for metal and Kynar® fitted pumps is determined by the elastomer (diaphragm material). Polypropylene pumps have a maximum liquid temperature of 180°F (82°C) regardless of diaphragm material. |
| Air Supply Pressure (All Models) | 20 to 100 PSI (1.4 to 7 kgf/cm²) |
| Discharge Volume Per Cycle |
Rubber diaphragm: 0.73 gallons (2.74 liters) |
| Maximum Cycles Per Minute |
Rubber diaphragm: 148 |
| Maximum Size Solid | 9/32" (7 mm) |
| Maximum Dry Suction Lift | Rubber-fitted pump capability: 18-feet |
| Air Motor | Standard: Aluminum |
| Optional Coating | PTFE-coated |
